Feature(may vary by option.)

●OUTPUT: 5V DC power out (5V 2.4A 12watts Max., Plug 3.5mm x 1.35mm, 5.5mm x 2.1mm ), 10/100Mbps ethernet data
●INPUT: IEEE 802.3af (DC44-56V) from poe switch or poe injector
●PLUG and PLAY: Require no configuration, a simple solution to expand your network to where you wish to place network devices but has no power outlet
●APPLICATION: works with non-PoE network devices that require a 5V dc input and a ethernet input, such as IP camera and more. please note: this spitter is only compatible with 10/100Mbps non-PoE devices, it DOES NOT support gigabit non-PoE devices
●WARRANTY: 2 years and unlimited technical support, Package content: 4x 5V PoE splitter

[USB C （5V)]

[Micro USB （5V)]

[Micro USB （5V Gigabit)]

[DC 3.5mm x 1.35mm & 5.5mm x 2.1mm (5V)]

Description

The PoE Splitter splits a PoE signal into an 5VDC power and 10/100Mbps ethernet data source.
This device allows you to run ethernet cables from a PoE Switch over long distance, and then split the PoE signal into a separate data signal and 5Vdc power sources in order to run an non-PoE devices.

Specifications:
Input: 44-56VDC max ; Shielded RJ-45 female;
Output: 5VDC 2.4A 12W Max.,
DC Jack: plug: 3.5mm x 1.35mm and 5.5mm x 2.1mm
Length of output cable: 19.0cm
Operating Ambient Temperature: -10 to 45℃
Regulatory IEEE 802.3af

What is included:
4x 5V PoE splitter

Note: this 5V PoE spitter is only compatible with 10/100Mbps non-PoE devices, it DOES NOT support gigabit non-PoE devices.