Feature

●【Very low shrinkage】D01S resin is designed for dental use, and the dental models retain their original size and shape for weeks, so can be easily assembled.
●【High dimensional accuracy】The model for dental applications requires extremely high dimensional accuracy, which directly affects the experience of dentists and patients. After several years of practical application of D01S resin, the printing results are undoubtedly satisfactory to both parties.
●【hard and wear-resistant surface】D01S is often used to 3D print plug-in dental models, they are not rubbed out of powder during assembly, nor will they be scratched by hard objects.
●【Matte surface and plaster texture】 D01S printed dental model has a matte surface and plaster texture, which is easy to observe the edge line of the dental model, and also ensures that the model is accurately scanned.
●【Broad adaptability】D01S resin is suitable for all mainstream LCD/MSLA/DLP 3d printers on the market, including RGB or Mono screen printers.

Description

D01S is a seashell-colored dental model resin with nano-inorganic powder added. The surface of the printed dental model is matte and has a plaster texture to ensure that it can be scanned accurately. The size is accurate, the surface is scratch-resistant, the shrinkage rate is extremely low, and it will not warp for a long time. It is suitable for printing restoration, plant and study dental models.


Very low shrinkage D01S resin is designed for dental use, and the dental models retain their original size and shape for weeks, so can be easily assembled.	High dimensional accuracy The model for dental applications requires extremely high dimensional accuracy, which directly affects the experience of dentists and patients. After several years of practical application of D01S resin, the printing results are undoubtedly satisfactory to both parties.	Matte surface and plaster texture D01S printed dental model has a matte surface and plaster texture, which is easy to observe the edge line of the dental model, and also ensures that the model is accurately scanned.

RESIONE D01S Dental Model Resin

Printing Settings

Layer Height: 0.05mm
Bottom exposure time: 30-60s
Normal exposure time: 2.1-4.2s

Cleaning and Post-curing

Cleaning tools: Toothbrush
Cleaning time: Less than 4mins
Cleaning solvent: 95% Ethanol or IPA
Post-curing light source: 385-405nm UV(40W)
Post-curing time:10mins

Mechanical properties

Shore Hardness:92D
Tensile Strength: 20MPa
Flexural Strength: 39MPa
Notched IZOD: 7.9J/m
Elongation at Break: 5%
Viscosity（25℃）: 435mpa.s

Attention!

Too long post-curing time will make the resin prints easy to warping, hard and brittle.
The resin prints will be fragile after post-curing. It is not recommended to apply force to the prints immediately. Just need to wait for a while until the internal stress of the prints is completely released.

Precautions

USE：

1. Operating temperature : 25~35℃,68℉~95℉
2. Shake well before each use. If the resin is very viscous, preheat the bottle with 60-80℃ warm water before shaking it.
3. Please wear nitrile rubber gloves during operation and keep the operating environment well ventilated.
4. Do not use resin near windows, balconies or other strong ultraviolet environment.
5. If you accidentally get resin into your eyes, mouth or nose, rinse immediately with plenty of water and consult a doctor.
6. The resin remaining on the skin can be washed with soap, hand sanitizer, etc.

Waste liquid：

1. If the resin is no longer needed, please pour it into a transparent container (pour a small amount at a time), then place it in the sun to completely cure it.
2. If it is a cleaning fluid containing resin, please do not discharge it directly into the sewer. You can put the cleaning solution in the sun first, wait until the resin inside is completely solidified and precipitated, and then filter out the solid residue, and the filtered cleaning solution can be used continuously.

Storage：

1. Store in a sealed, shading, and cool place.
2. Keep away from fire.
3. Keep out of reach of children.
4. If you do not need to use the resin within 1 day, please pour it into a clean, light-shielded container and keep it tightly sealed. Do not mix the printed resin liquid with the unused resin to avoid contamination of the new resin.


	Anti-impact	TH72	M58	K	F69	F80
	See Details
Customer Reviews	—	12	25	25	53	56
Price	—	£41.99	£58.99	£36.99	£46.99	£78.99
Characteristic	Nylon-like Resin	Flexible tough Resin	Tough Resin	Tough Resin	Flexible resin	Elastic resin
Color	White grey	Medium Grey	Grey	Black	Black	Black
Shore Hardness	78D	74-78D	87D	82D	60~75A	50-60A
Viscosity（25℃）	715mpa.s	618mpa.s	307mpa.s	307mpa.s	1250mpa.s	2300mpa.s
Tensile Strength	21MPa-28MPa	23MPa	52.3MPa	48.5MPa	7.9MPa	3.8MPa
Elongation at Break	81%-100%	25.40%	12.3%	16.8%	255.1%	159%