This DMX512 must be operated with a power adapter, not with a battery. !
*User manual
reliability
1. 7 groups ID code adjustable, users can use 7 groups single wireless network without any interference
2. Each other in the same place...(tricolour LED display indicators)
3. Input voltage: 5 V DC 500 mA min.
4. Communication distance: 400 m (visible distance).
5. Operating frequency range: 2.4G ISM, 126 channels. Frequency range
6. Maximum transmitting power: 20dBm
Operating instructions:
ID code and LED colour corresponding relationship:
1: red.
2: green.
3: red and green.
4: Blue.
5: red and blue.
6: green and blue.
7: red, green, blue.
1. Press the button above the side LED indicator to display the ID setting.
2. Press again to set IC to the desired colour ID by pressing 1 each time the switch is pressed.
the colour ID code.
3. Working condition:
LED lights up constantly: no DMX or radio signal.
Red LED flashing: transmission.
Green LED flashes: reception.
4. RF frequency 2400-2525G, total 126 channels, it searches automatically,
5. ID code "1-7" groups ID code, press KEY for setting, it can only be used under the same ID code of
Transmitter and receiver. (Same LED colour).
Operating instructions:
Making communication:
1. Turn on the DMX512 wireless reception card first and then the
sent cards.
2. Press the "Key" button to set the same ID value of the sent and received cards. Please
Please use a different ID value if you have more than 1 group of wireless universals at the same time.
the same place.
3. The red LED flashes when the transmitter sends DMX data on an undisturbed frequency.
section, then the receiver changes the communicated frequency section. Green LED flashes until
Received corrected same ID value, LED flash faster when DMX data faster.