Feature

●Application: The transmitter is designed with non-linear output, it can only match standard gauges with non-linear signals. Suitable for boats, yachts, trucks, RVs.
●Unique Design The donut float type level transmitter is durable and reliable to use, and no moving parts can break, no adjustment needed for the tank.
●USE: The transmitter of the water and gas tank sensor is designed for non-linear output and can only be adapted to standard meters with non-linear signals. Suitable for use on boats, yachts, trucks and caravans. The universal version is better suited to your needs, but we recommend that you ask us via QA or email if you are unsure.
●APPLICABLE HOLE SIZE: The diameter of the float is 1.38 (35mm). If holes need to be drilled, a 1-1/2 (38mm) diameter hole would be perfect. Product quality is manufactured according to strict original standards, and old or broken products can be replaced to improve time efficiency. Quality products are only designed to give you a more comfortable experience and we are committed to serving our customers well.
●COMPLETE ACCESSORIES: Fuel level sensor with gasket and mounting screws to prevent the sensor from coming into contact with the bottom of the fuel tank. The parts are tested and checked on the vehicle to ensure optimal driving. Focused on providing high quality products at reasonable prices, professional factory and professional technical support.


Description

Specifications:
Item Type: Fuel Sending Unit
Main unit: 316 stainless steel
Cable: PVC
Float: NBR
Installation: 5-hole SAE standard type
Screw Size: M5 x 0.8
Opening: approx. 5 mm/0.20 inches.
Product size: about 12 in/300 mm
Recommended Water Tank Size: 12.3"-13" (310-330mm)
Signal output: American standard 240-33 ohms (240 ohms no load, 33 ohms at full load)
Resolution range: approx. 21 mm/0.83 inches.
Fuel and water level sensor type: Reserve
Alarm switch Rated current: 500mA
Protection class: IP67.
Operating Temperature: -40°F ~ +185°F (-40°C ~ +85°C)
Application:
Suitable for boats, yachts, trucks, RVs.

Package List:
1 x Fuel Sending Unit
5 x screws.
1 x gasket.

Note:
1. This fuel tank sensor is 240-33 ohms, only suitable for 240-33 ohm fuel gauge. Please make sure your product is suitable for 240-33 ohms before buying.

2. When the oil level or water level is empty, there will be a gap of 3-15mm between the sensor float and the bottom of the sensor. This is a safety dnce and the fuel transmitter will work properly.
3. Please check the size and product description carefully before buying, if the fuel tank is plastic, the length of the fuel tank liquid level sensor should be 1 inch smaller than the depth of the fuel tank, if the water tank is metal, the length of the liquid level sensor should be smaller than the depth of the fuel tank 0.5-1 inch