Description
THE LEAD IS MODIFIED TO APPEAR TO BE A LIVE OBD Port.
When thief tries to connect OBD tool it seems to be live but doesnt transfer any information
therefore thief loses ability to start the car via OBD port.
Fitment
Will fit without modification to all Ford with white diagnostic port:
All Ford Focus MK3s including ST & RS 2011-2018
All Ford Fiesta MK7.5s including ST 2008-2017
All Ford Transit custom EU5 EURO 5
And others..
Simple Plug and Play. Takes Minutes To Fit.
This OBD plug will fit all MK3 Ford Focus models and all Ford Fiesta MK7 & 7.5 models including the ST 180, ST 200, Focus RS and Focus ST 250 pre and post facelift.But Please note this lead will fit the Transit Custom upto 2016 EU5 with the white OBD port but will not fit the 2017 EU6 as the OBD port is not removable
. 1. These leads are made using new genuine Ford OBD ports. These ports are not normally available unless you purchase an entire wiring loom.
2. Wires wrapped in the same canvas tape Ford uses on their wiring looms and use Bi-colored wires so it will look identical the original when fitted.
3. To fit simply remove pull off the dash lower panel which is held by clips then unclip your original port and clip the dummy in its place. Then plug the black male connector on the dummy into your genuine port. Now relocate the original to a place of your choosing out of sight to a thief. Finally using the cable ties supplied strap the dummy lead to your cars wiring loom to make it look like the original port.
Protector has been fully independently tested to ensure when fitted, it does not have any negative effect on a vehicle.