DETAILS: Non-slip feet - Three feet with non-slip pads ensure better stability and ensure smoother sewing as well as better protection of your floor, making it a good assistant for old and long time shoe machines with locks. Needle Clamp: It is used to hold the needle in place, which allows you to achieve tighter and more accurate stitch alignment. Thread Machine: You can place the used bobbins on the top, which gives you more comfort when working. Usage: It can be used in many households, shops, etc. to sew fabric shoes, rubber shoes, leather shoes, travel bags, raincoats, etc. It is suitable for nylon, silk and cotton threads. How to use: 1. Assemble the tripod first. Place the main body on the tripod. Make sure both corners have the same angle. 2. Rotate the nylon wire into the pins. 3. Card slots fit locks. Mount the crank. Turn the crank slightly to start the machine. 4. Thread the thread step by step and simply pull when finished. 5. Use the screwdriver to lift the floor. Remove the small spool and thread it. 6. Make sure the needle has touched the controls. Use the wrench to twist the needle when it touches. 7. Change the seam area by pressing the rotary button. Select the desired distance clockwise or counterclockwise. Technical specifications: Model: JX-JJ Material: Iron. Colour: Black. Process: Galvanizing, Spraying Type: Semi-Manual Maximum stitch width: 6 mm. Maximum cutting thickness: 3-5 mm (actual cutting thickness depends on the material). Assembly Required: Yes Mounting type: floor mounting. Number of elements: 1 Gross weight: 11 kg. Net weight: 10.5 kg. Product size (L x H): 44 x 28 cm. Stand dimensions: 63 x 48 cm. Package size: 48 x 13.5 x 30.5 cm. Box contents: 1 x shoe repair machine for gloves. 1 x English User Manual All accessories for installation. Indications: 1. When adjusting the tension of the upper wire, you only need to adjust one of them. 2. The material of this product is iron, which is easy to rust, so the surface of the machine is covered with anti-rust oil. One side of the machine stand is stable, if not, please install it on one side. 3. It is made by hand by a forged master, so the product leaves a tapping trace and is not as smooth as the machine taking the shape. 4. The moving parts of this product need to be filled regularly to ensure that the machine runs smoothly and quietly, improves efficiency and extends the service life. It is recommended that the machine that has not been used for a long time should be lubricated before use. 5. Preparatory work before operation: pull the presser foot upwards to avoid friction between the presser foot and the tip plate, check the firm hold of each fixing screw, add lubricating oil (not included) to each oil point, and then shake the guide plate without using the jamming noise. 6. Do not shake the handle backwards during work to prevent the spool from tangling inside. The slot of the needle should be facing outwards so that the thread does not tear. 7. Please read the user manual carefully before use. Pay special attention to safety instructions.