Support Read&Write and Off-line Clone Duplicator:
About read and write mode:
1. The SATA disk location only supports M.2 SATA protocol B&M key;
2. NVMe disk location only supports M.2 NVMe protocol hard disk;
3. In the read-write mode, when the power supply is connected to the computer and the drive letter light is red,
it means that the hard disk is abnormal. When the drive letter light is blue, it is normal, and the blue light corresponding to the drive letter flashes when reading and writing data;
4. If the light of the drive letter connected to the computer is blue, but the computer does not have a disk, you can connet to the computer manage disk management, check the status of the hard disk if it needs to be online or formatted.
About clone mode:
1. In clone mode, you only need to connect the power cable, not the data cable to the computer;
2. In clone mode, the capacity of the target disk needs to be equal to or greater than that of the source disk;
3. After setting the clone mode, press and hold the copy clone button for 3-5 seconds, and the copy light will change to 25% blinking to 25-50-75-100% steady light means cloning is complete;
4. After inserting the corresponding hard disk and connecting the power supply, if the corresponding drive letter light appears blue light if it is normal, the red light indicates that the hard disk is faulty. Please check thw reliability of the hard disk.