Conductor detection continuously (path)
There are two ways to detect the connectivity of lines:
a)OnIy use the transmitter to detect. Turn on the power of the transmitter,turn on the power indicator light,and the transmitter starts to work. Then pull the function knob switch to the "CONT" position, and clamp the red and black clamps to both ends of the line to be tested. If the impedance indicator light is on,the line is continuous. The smaller the line impedance is,the more the indicator lights are on. If it is more than 1K, it is considered that the line is not
connected. If it is less than 1K, every 100 CI Iess,one more lamp will be lit.