[18 Litre reservoir]

[2.5 Litre reservoir]

[11 Litre reservoir]

[8 Litre reservoir]

[13 Litre reservoir]

[7 Litre reservoir]

Flowfit 12V DC Double/Double acting hydraulic tipper powerpack, 2.5,4.5, 7, 8, 11, 13 or 18 litre reservoir c/w with 2 button pendent. 5l/min @160 bar. Hydraulic Power Unit Package to operate a single acting cylinder on any trailer or tipper application complete with detachable two button pendent.

12v dc powerunit.
2.1cc/rev gear pump.
1.6kw 12vdc electric motor c/w relay and plastic motor cover.
2.5,4.5, 7, 8, 11, 13 or 18 Litre reservoir c/w drain plug.
Powerpack complete with suction strainer, return oil conveyor and filler breather.
Horizontal mounting Max pressure 200 bar.
Relief valve set at 160 bar but adjustable from 40-200 bar as standard.
Max flow 5 l/min. Adjustable flow control for cylinder decent control.
12v dc let down valve, relief and P line check. Port size 3/8 BSP.
2 Button detachable pendent on a 4 metre lead.
Suitable for all single acting applications.

The Flowfit 12VDC Single Acting power pack will require a high capacity battery and a suitable in-line fuse for normal operation.

The motor is designed for intermittent use (S3) which is defined as a sequence of identical cycles of 10 minute duration. The cycle comprises a period of on-load (td) operation in which the motor may reach its maximum permitted temperature, followed by an off-load (tm) of time, insufficient for the motor to return to ambient temperature.

The value of S3 on this motor equates to 7% or 42 seconds of on-load operation in a ten minute period.