Feature

●The numbered replacement part (OE number): 7506158, 13537506158.
●Adaptation: for BMW 116i 118i 120i E87 2003-2011, for BMW 316i 318i E46 2001-2005, for BMW 316i 318i 320i E90 2004-2012, for BMW X3 E83 2000 2004-2012. 5-2016 1, For BMW Z4 E85 2005-2009
●Fuel-efficient injector: High-efficiency fuel sprayers and high-impedance coil enable quick start in cold environments, low fuel consumption, and better performance.
●Professional installation is highly recommended: Fuel injectors directly affect the air-to-fuel ratio of the engine and new fuel injectors require a new tuning or update. We also suggest you check the other engine components before installation.
●Package includes: 4 Pcs Fuel Injector; Material: Metal, Plastic; Number of Pins: 2; Voltage: DC 12V; Port Type: 4-Hole Disc Flow Rate: Same as original.


Description

Description:
Made of metal and plastic which is durable and can be used for a long time.
The high impedance fuel injector has been tested and exactly matches the resistance of the internal coil and the fuel flow of the OEM fuel injector.
This is a non-OEM product, accessory only!

Specification:
O-rings included: yes, pre-installed
Orifice type: 4-hole disc
Voltage: DC 12 V.
Material: Metal, Plastic
Colour: black.
OE number: 7506158, 13537506158.
Pin Number: 2
Dimensions: 78 x 29 x 20 mm/3.07 x 1.14 x 0.79 inches (L x W x H).
Flow rate: Same as original

Compatibility:
For BMW 116i 118i 120i E87 2003-2011
For BMW 316i 318i E46 2001-2005
For BMW 316i 318i 320i E90 2004-2012
For BMW X3 E83 2005 -2011
For BMW Z4 E85 2005-2009

Package includes:
4 x Fuel Injectors

I
Installation:
Step 1. Make sure the engine is cold. Disconnect the battery.
Step 2. Remove the bolts and brackets from the feed ramp.
Step 3. Disconnect the cap from each injector.
Step 4. Lift the fuel ramp and remove the injector from the fuel ramp.
Step 5. Press the new injector into the rail. h the fuel ramp and place the injectors in their respective holes.
Step 6. Bolt on the fuel ramp Reconnect the fuel line. Plug in the injector connectors. Reconnect the battery.
Step 7. Check again if there are fuel leaks before and after starting the engine.