Feature(may vary by option.)

●EXCELLENT WORKMANSHIP: This powerful hole cutter is made of M42 high-speed steel and bi-metal, with higher hardness (≥65HRC), higher toughness, higher cutting strength, and stronger wear resistance. Also, Built rust-proof for repeat use. It’s cutting depth is 27mm.
●PROFESSIONAL MATERIAL: The 54mm hole saw is made of HSS carbon steel & Bi-metal steel, which has superior performance and higher cutting strength than others hole saws. Built tough for repeat use and handy for working on cornhole boards and plastic.
●SMOOTH CUTTING: he high-quality bi-metal blade and variable pitch sharp HSS teeth combine with Non-binding clean edge design ensures smooth and clean cutting of the hole saw blade. The spring on the drill would automatically pushes the disc out of the saw immediately after completing the hole.
●WIDE APPLICATION: Our Bi metal Hole saw is perfect for cutting wood,plywood, plastic, drywall, soft plaster,acrylic-board and thin metal. In addition to cutting holes for can lights or recessed lights, the Hole Saw comes in handy for home projects when working on air ducts, ceiling lights, speakers and more.
●CUSTOMER SERVICE: We are dedicated to providing every customer with satisfying products and services. If you are not satisfied with our hole saw, we will provide a free replacement or full refund for you. We wanna our customers to be 100% satisfied.

[114mm Black]




[102mm Black]




[152mm Black]




[83mm Black]




[127mm Black]




[54mm Black]




[68mm Black]





Description

Ihomepark takes every customer seriously and provide our customers with the most cost-effective products responsibly.
Most users prefer a bi-metal hole saw for the majority of their work because it is compatible with a wide variety of materials.
It also cuts faster and smoother and with reduced vibration due to the variable pitched teeth.
HSS bi-metal hole drilling cutter for smoothly cutting in wood cornhole boards plastic drywall & thin metal

 Suitable for cutting viariable materials
Wood, Hard Wood Floors, Plywood.
Plastic, Fiberglass, UPVC / PVC, Acrylic, Glass.
Steel, Cast Iron, Stainless Steel, Alloyed Aluminum, Bronze, Copper.

 Cutting Steps:
1. Installing guide holes and hole saws.
2. Hold the drill pen until the cutting surface and rotate clockwise.
3. When drilling starts, cut at a slow speed and maintain a steady pressure.
4. The hole saw then cuts out the hole immediately.

 PLEASE NOTE
1. Hole saw may become overheated and get damaged or even burned up due to fast rotary friction, we suggest to use coolant (Not Included) to keep the hole saw cold during using.
2. Hold the drill straight to the cutting surface, and drill as clockwise rotation
3. Keep the drill be stable when drilling, otherwise, the center bit may get snapped due to excessive shaking.
4. Start drilling with a slow drill rotary speed, or the center bit may be shattered on first use.