- AUTO 1: The LED lights stay blue and the beam lights change automatically
- AUTO 2: The beam light stays green and the LED lights change between red and blue
- AUTO 3: The beam light stays red and the LED lights change between red, blue and green
- SOUND 1: The lights are working under the sensitive sound-activated mode and strobe with the music
- SOUND 2: The motor works at a faster speed, and lighting effects will change with the music
- SOUND 3: The motor works at a slower speed, and lighting effects will change with the music
|
- PATTERN 1: Only turn on the beam lights.
- PATTERN 2: Only turn on the Red beam light.
- PATTERN 3: Only turn on the Green beam light.
-
- Warm Tips for Remote Controller:
- 1. Unplug the white transparent insulating sheet at the bottom of the remote controller before use.
- 2. Please aim at the IR receiving port on the party light to operate it. If not, it may result in an insensitive operation.
- 3. After using the Remote Controller for a period of time, it is recommended to replace the battery of it. There is a spare battery on the side of the remote controller.
|
- LED AUTO: The LED lights change automatically
- R: Turn on the static Red LED light only
- G: Turn on the static Green LED light only
- B: Turn on the static Blue LED light only
- RB: Turn on the static Red and Blue LED light only
- RG: Turn on the static Red and Green LED light only
- GB: Turn on the static Green and Blue LED light only
- RGB: Turn on the static RGB LED lights
|
- Time 1h: Setup the timer for 1 hour
- Time 3h: Setup the timer for 3 hours
- Time 6h: Setup the timer for 6 hours
- Time 8h: Setup the timer for 8 hours
|