Feature

●Convenient and Effective: Mixing car wash and water, shake the Snow Foam Lance, it will produce soft fluffy snow foam, and spray to the part you need to clean. Then only use tap water to rinse it clean.
●Protect Car Model: Snow foam attached to the surface of the car, the thick foam melt rods and dirty on paint, thus it reduces swirl marks and scratches.
●Adjustable: Top nut of the foam cannon can be rotated to control the amount concentration of the foam stream. Rotating the nozzle can adjust the spray angle.
●Environmental Protection and Durable: Save water, all metal parts made by copper, all nozzle and connectors has rubber rings, bottle made by strong PA material. Long time to use.
●Commodity Commitment: The jet washer foam cannon warranty period is one year. If you have any question about the product, contact StoneBanks’s customer service at any time and we will try our best to meet your requirements.

Description

Compatible models

Are you looking for a suitable snow foam lance, we can offer it. Here is your best choice!

Compatible with LAVOR (ARAL, BOLT, SMART, INDIE, FORCE, SPLIT, VERTIGO, IKON, VAX COMET and others), not suitable for LAVOR WASH LWX 1500）
Compatible with Aldi Workzone (domestic)
Compatible with Parkside Foreman Sterwins Hitachi Sorokin Copokin Hammer Elitech Champion, including Parkside PHD 110 d1
Compatible with Qualcast
Compatible with HUTER: M135-HP
Compatible with Spear and Jackson
Compatible with Oasser
Compatible with McGregor 1400w & 1800w

Advantages

1、 Compatible with Lavor pressure washers.

2、 Produces good thick foam, is easy to use, and saves a lot of cleaning time and effort.

3、 A 34-ounce liquid storage tank allows you to perform a full stretch on two cars or a large SUV.

4、 Adjustable nozzles allow you to adjust the foam/water pressure as needed.

5、 The bottle is thick and strong, so it is not easy to break.

6、 The nozzle is well sealed and has no leakage.

Maximum Water Temperature: 60° C

Specification

Interface Material: Copper
Handle Type: Finger Type
Nozzle Material: Alloy
Body Material: Engineering Plastic
Water Spray Type: Spray
Capacity of Bottle: 1000ml (35.2oz)
Pressure Range: 100 bar - 200 bar (1400psi - 3000 psi)
Construction Material: Solid Brass, Resistant Nylon & HDPE Bottle

How to use?

Our snow foam lance are delivered in the form of accessories, not a whole. When you receive the goods, you need to assemble it closely yourself.

1.Put the shampoo or wash powder into the bottle.

2.Fill the water into bottle,make sure the proportion of shampoo and water is correct!

Youd better use warm water(not hot) to make more foam.

3. Shake the Snow Foam Lance to make the shampoo dissolve and more foam.

4. Connect the bottle to foam lance unit.

5. Connect the foam lance to car washer gun and then you can use it!


The Function Knob The top knob of snow foam lance can adjust the foam concentration.	The Adjustable Spray Nozzle The adjustable spray nozzle can adjust the spray shape from pencil to 60° fan.	Fine Workmanship The o-ring seal gasket and waterproof tape can prevent leakage and keep long time to use.	Compatible with Lavor Series The foam cannon adapter is compatible with Lavor series pressure washer.