Feature
●【4-Pack Replacement Kits】4.5cm*6.5cm rectangular metal plate x 2 Pieces,round metal plate with a diameter of 4cm X 2 Pieces
●【Material】The product is made of high-quality manganese steel material and the matte surface is easier to clean than ordinary ones.
●【Thin&Practical】The thickness of the product is only 0.5mm, which is light and practical.The metal plate is very thin and light.3M adhesive works well and is easy to install.
●【Use For Magnetic Mount】Metal plate is mainly used for magnetic phone support, it without magnetic.3M adhesive on the back of the sheet metal, used in the fixed plate of the back of the phone.
●【Tip】 The metal plate do not with magnetic.The metal plate is design for magnetic car phone holder and can work well for it.
Description
Widely compatible
Compatible with Various Types of Magnetic Phone Holders
Various Location: Air Vent / CD Slot / Dashboard / Windshield / Suction Cup / Cup Car Mount/Bicycle / Vehicle / Universal and all Magnetic Phone Mount.
Compatible with Popsockets Grip
1. Only Diameter 4cm Round Mount Metal Plate can Work for Popsockets Grip.
2. Only Stick on Outside of the Callapsible Grip & Stand, NOT Inside.
3. Easy Use: Pop out the Grip, Stick the Metal Plate onto the Cap, then it is Compatible with Magnetic Mount.
4. Super Thin, almost NOT Add the Thickness of Popsockets.
Features
|
|
|
|
|---|---|---|
Strong Adhesive1.The back of the metal plate with strong adhesive, it make the metal plate will not easy to fall offand more durable. |
Super Thin2.It is very thin and can better fit the surface of the phone or phone case.Widely Compatible with ALL Smartphones without Textured / Curved Surface. |
Work Great3.Work great with Magnetic Mobile Phone Car Mounts. |
HOT NOTE
1. AVOID AFFECTING WIRELESS CHARGING, Please Place Metal Plate on the Phone AWAY FROM WIRELESS CHARGING SENSOR;or Place Metal Plate on Phone Case,Please Remove the Phone Case before Wireless Charging.
2. These Metal Plates with 3M Adhesive Can NOT be Reused after Removed, Can NOT Used as Toys for Babies and Children.
3. All of the Metal Plates have no Magnets, and They Do Not Have any Magnetism.It just Replacements Plates for Magnetic Car Mounts.
4. Not Recommend to Apply on the Leather / Silicone / Soft Case, or with Textured / Curved Surface.If the Back of the Phone is Curved Glass, it is Recommended to Stick the Metal Plate on the Flat and Smooth Phone Case.
Installation of the metal plate
|
|
|
|
|
|---|---|---|---|
Step 1Clean and Dry the Surface of your Phone / Phone Case with the Alcohol Pack. |
Step 2Tear off the Transparent Protective Film and Stick it on the Back of Phone or Phone Case. |
Step 3Peel Off the Sticker and Place the Metal Plate on the Transparent Protective Film of the Phones / Cases Surface.Adhere with Finger or Hand Pressure on it for Consistent 20 Seconds.. |
Step 4Suggest you Wait for 24 Hours before Using to Make Sure it Firmly.Use Hair Dryer to Blow Hot Wind on it to Melt the Adhesive to Remove it. |
3 Ways to Install the Metal Plates
You can Place it Inside or Outside of Phone Case / Back of Phone.Phone case with a thickness of more than 1mm is not recommended.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| Car Cup Holder Phone Mount | Auto-Clamping Wireless Car Charger Mount | Suction Cup Car Phone Mount with Air Vent Hook Clip | Magnetic Car Phone Holder | Metal Ring Sticker | Super Stable Hook Clip Car Vent Phone Holder | |
| Customer Reviews |
342
|
300
|
11
|
261
|
10
|
51
|
| Price | £9.99 | £25.99 | £15.99 | £14.99 | £7.99 | £9.99 |
| Holding method | Cup Holder base | Suction cup&Ventilation clip | Suction cup | Suction cup | Sticky glue | Ventilation clip |
| Installation location | Cup Holder | Horizontal vent&Dashboard&windshield | Horizontal vent&Dashboard&windshield&Air vent | Horizontal vent&Dashboard&windshield | Phone back & phone case | Air vent |
| Compatibility | All 4-7 | Mobile phones with QI wireless charging function between 4-5 inches | All 4-7 | All 4-7 | All 4-7 | All 4-7 |
| Turning head | ✓ | ✓ | ✓ | ✓ | ✓ | |
| Features | It consists of a strong and adjustable base, a durable flexible hose and an exquisite clip. | Automatic clip wireless charger mobile phone holder, with clip ventilation / dashboard double mounting base | It consists of a sturdy and adjustable base, an upgraded air hook clip, and an exquisite clip. | Strong magnetic force, the long arm telescopic suction cup phone holder can be installed on the dashboard or windshield. | Metal ring sticker is mainly used for Mag-safe, it without magnetic,It can enhance the magnetic adsorption capacity of Mag-safe. | Upgraded hook clip design of the car phone holder,with overload protection |