A 600ml sausage gun applicator for use with single component materials. Can also be used with standard
cartridges.
Features
Anodised aluminium barrel copes easily with high forces.
Barrel rotates for manoeuvring into tight corners. Powerful
25:1 ratio trigger for easy application. Sintered metal catch
plate for high wear resistance.
Use
Withdraw the rod from the barrel by pushing the rod
release plate forward whilst pulling on the rod.
Cut the nozzle diagonally to the required hole size. Unscrew
the black end cap from the gun and insert the nozzle.
Cut the end of the sausage and slide this into the gun, open
end at the top and screw the black end cap into position.
Pull the trigger to push material out of the sausage.
Once the sausage is empty, withdraw the rod as before,
unsecure the end cap and remove the empty skin. Replace
with a fresh sausage and continue.
When using with a standard mastic cartridge, remove the
barrel, unscrew the nut on the end of the rod to remove the
pusher plate.
On the other end of the rod is the piston pusher, unscrew
this and swap the two over, tightening the securing nuts.
Re-assemble the barrel.
Colour
Silver barrel.
Size
For 600ml foil sausages.
Disposal of Containers
Do not leave empty containers where residue could be harmful to children, animals or the environment. Replace
lids and remove any containers to a central disposal point in
accordance with local regulations.
Health & Safety
This product will cause no major hazard or problem to the
users health. Please refer to separate material safety data
sheet for full handling, use and storage instructions. Keep
out of reach of children. It is the users responsibilit