[Set Soft 50-50]
[Ivory]
▶Specification:
*The spring gives the possibility to adjust the spring preload +10/+25mm> Each complete turn corresponds to a setting of 1 mm
*The rate of the spring 68034-50 is 5.0 N/mm
*The rate of the spring 68034-60 is 6.0 N/mm
▶Note:
When installing the fork damping kit, be careful not to damage the original circlip.
The oil level measurement is taken from the top of the inner tube to the surface of the oil.
The fork arm must be in an upright position.
The fork must be completely compressed.
Please make sure the fitment before ordering. Thank you!