Feature(may vary by option.)

●Motorisee 3 Way Valve DN25 Ball Valve, Made of high quality brass, reliable performance, output torque, long service life.
●Motorized valve specification: Voltage: AC 230V, Power: 6~20W, Action time: about 15s, Control method: Three cables two controls.
●Working fluid: cold/hot water or 50% glycol solution, fluid temperature: 5~95°C, bearing pressure of valve body: ≤1.6Mpa, protection rating: IP52.
●The actuator drives the coil in rotation, so that the electric valve stops when it is fully opened or fully closed. Widely used in heating, air conditioning, underfloor heating, solar power and other systems.
●The motorized ball valve comes with a user manual, please carefully follow the instructions to plug the cable. If you have any questions about motorized solenoid valve ball valve, please feel free to contact us by email and we will be more than happy to help you.

[3 Ways | Dn20 3 4 Inches | Ac 230v]

[2 Ways | Dn25 1 Inch | Ac 230v]

[2 Ways | Dn15 1 2 Inches | Ac 230v]

[3 Ways | Dn15 1 2 Inches | Ac 230v]

[3 Ways | Dn25 1 Inch | Ac 230v]

[2 Ways | Dn20 3 4 Inches | Ac 230v]

Description

SWAWIS Professional 3 Way Motorised Ball Valve

The motorized valve consists of a ball valve and an actuator. The actuator drives the coil into rotation, so that the valve stops when it is fully opened or fully closed. Widely used in heating, air conditioning, underfloor heating, solar power and other systems.

Specification

Valve material: brass, stainless steel, ABS

Voltage: AC 230 V.

Power: 6~20W

Working time: approx. 15s

Protection type: IP52.

Bearing pressure of valve body: ≤1.6Mpa

Fluid temperature: 5~95°C

Working fluid: cold/hot water or glycol solution at 50

Regulation method: Three cables two controls

Model: DN25

Box contents:

1 x DN25 3-way motorized ball valve

Note:

1. Install the valve body on the corresponding line, connect the actuator and tighten the actuator nut.

2. The direction of water flow should match the direction of the arrow on the valve body.

3. Turn on the device for at least 1 minute and connect the cables strictly following the instructions.

4. Two or more solenoid valves cannot be connected in parallel. If a parallel connection is required, it must be isolated by a relay.

5. The servo motor has an IP52 protection rating and should not be used outdoors; when used outdoors, a waterproof housing is required.