Feature(may vary by option.)

●【Features】PET material,Transparent,not affect appearance.Self adhesive,Removeable adhesive,no any glue problem.
●【Safety】After stick the safety film on the glass, the glass fragments do not splash and fall.Effective protection of personal safety.
●【Anti-uv 】Block UV rays and sun, to better avoid the indoor furnitures of fading, aging.
●【DIY Friendly】Please make sure you have removed the protective film before you apply the adhesive film to glass. Use two pieces of tape to grab onto one of the corners on each side of the film. Once you start pulling apart the tape, the backing liner should start to peel off from the window film itself. Remember to closely follow the installation manual and use lots of soapy water to prevent the air bubble.
●【Applicable place】Airports, schools, banks, offices, jewelry stores, shower rooms, hotels, display cabinets and a strong security needs of private house glass.

[30in*16.4ft]





Description

11

  • Thickness: 2mil/0.05mm thickness, suitable for indoor ordinary glass explosion-proof.
  • Prevent the glass fragments from splashing and falling when there is an accident.
  • Window Film can absorb impact from break-in attempts and hold shattered glass together in case of breakage.

How Safety Window Film Works

  • When installed onto the glass, the strong adhesive bonds to it, creating a barrier.When smashed or broken, the film holds all the shards together, eliminating the normal hazard.

Excellent Optical Clarity

  • The film is optically clear to the human eye when installed. This means theress no visible tint and will allow clear vison on both side of the glazing.

11

11

11

Suitable for bedroom glass

Suitable for kitchen glass

Suitable for office glass

11

How to install?

Step 1. Keep Window or Glass clean.

Step 2. Wet the Window or Glass with water (Soapy water will be better).

Step 3. Remove the adhesive film from protective film (Please make sure you have removed it before you apply the white matte window film to glass).

Step 4. When you install it, apply to wet glass and adhesive side.

Step 5. Squeegee away air bubbles and redundant water(From top to bottom, from the middle to the sides).

Step 6. Cut off the edge and enjoy your work.

11

Product information