Feature
●➤ Adjustable Shock Mount Equipped -- You can get: 1 * Microphone Arm Stand,1x Mic Clip,1 * Table Mounting Clamp,1 * 3/8 to 5/8 screw adapter,1 * Microphone Shock Mount,4 x Cable Tie.The diameter of ABS plastic microphone shock mount is 1.77/4.5cm,it can be changed by adjusting the O-rings of shock mount,compatible various mic.Max diameter:2.05/5.2cm.Tip:You can refer our video to adjust the O-ring diameter.MICROPHONE NOT INCLUDED
●➤ High Quality Heavy Duty Design -- The microphone stand made out of high quality steel frame with super-strong springs,zinc alloy pedestal and ABS plastic clip shock mount,it is sturdy and durable.The heavy duty steel tripod legs are designed to spread the bearing weight of the stand,so it can be used at different heights and weights with equal weight distribution and enhance balance,making your mic stand have a more better load-bearing capacity.Max Load: 4.4 pound/2 kg
●➤ Compatibility and Applicability -- Each package comes with a professional 3/8 to 5/8 silver screw adapter,which is line with industry standards,so our mic arm also can compatible with the Blue Yeti,Snowball or other microphone.Tips:If screw adapter is a little smaller than Blue Yeti,you can use Thread Tape to wrap around the screw adapter on your shock mount,increasing the thickness of the mounting screw effectively and still maintaining the actual screw thread to connect with the mic
●➤ Stability and Safety -- Dual suspension springs on each boom arm made of heavy duty steel tripod design,equip one shock mount can prevent your microphone from shaking,dropping or produce noise.Come with one table mounting clamp and an adjustable positioning screw,clip it on desktop thickness within 2.15/5.5cm easily and firmly fixed it (Added with soft mat or rubber washer it can avoid damaging your furniture).NOTE:Referring the Instructional Video can install the microphone stand easily
●➤ Foldable and Adjustable -- With the 360° rotatable arm,the stand can be extended up to 27.6/70cm.The microphone arm is equipped with super strong spring,The normal load bearing capacity is 1.5 kg,the max load can up to 2 kg after adjusting the spring hole.Suitable for Live broadcast,YouTube/Facebook Video recording,Voice-Over,recording studio,TV channels,stage and family performance etc.You can search B09HKHXHW2 to buy a Pop Filter on Amazon.
Description
|
|
|
|
|---|---|---|
Heavy Duty Mic Stand•This special heavy duty steel tripod legs design provides the support with an upward pull. Compare with the old version, it has a greater bearing capability •If you have adjusted all the buttons and still feel a bit shaky, pleas dont forget to tighten the little screws on this triangle part •Four springs are the support for weight bearing. If you want more weight bearing, you can turn the spring forward by one degree |
Mic Stabilizer & Adapters•You can adjust the 0-rings for different diameters and varying degrees of tightness (pic 4 & video) •We specially purchased professional 3/8” to 5/8” original metal adapters to meet most of the microphones on the market. Compared with our previous yellow brass adapters,this metal adapter is more suitable •There is a plastic adapter come with the shock mount. If the metal one is not suitable, it can be temporarily replaced by the plastic one and please tell us at the same time |
Table Clamp for Full Angle•The adjustable height of our new type table clamp is around 6 cm.It with a layer of sponge to protect the desktop, you can add an extra latex washer to increase friction and protect the bottom of the desktop •180° foldable arm and 360° swivel mount the stand can be moved in full angle •Try to make the table clamp and mic arm stand facing in the same direction,will be more stable, especially for customers with small tables |
It is a great combo for singers and actors alike who want help achieving the best possible performance
|
|
|
|
|---|---|---|
|
|
|
|
